Sewing Cylindrical Or Large Pieces; Stitching Cylindrical Pieces; Sewing Large Pieces Of Fabric - Brother NX-200 Operation Manual

Sewing Cylindrical or Large Pieces

When sewing cylindrical or large pieces of fabric, remove the flat bed attachment.

Stitching cylindrical pieces

Removing the flat bed attachment makes it easier to
sew cylindrical pieces such as cuffs and pant legs.
1 Pull the flat bed attachment off to the left.
With the flat bed attachment removed, free-
arm sewing is possible.
2 Slide the part that you wish to sew onto the
arm, and then sew from the top.
When you are finished with free-arm sewing,
3
install the flat bed attachment back in its
original position.

Sewing large pieces of fabric

The optional wide table makes sewing large pieces
of fabric easier.
Open up the legs at the bottom of the wide
1
table.
Pull out the four legs until they snap into place.
2 Pull the flat bed attachment off to the left.
With the flat bed attachment removed, free-
arm sewing is possible.
3 Install the wide table.
Keeping the wide table level, fully slide it into
place.
Note
● The optional wide table is available through
your brother retailer.

Sewing Cylindrical or Large Pieces

33