Brother NX-200 Operation Manual page 29

4 Insert the extra spool pin onto the bobbin
winder shaft.
Insert the extra spool pin so that it is
perpendicular to the bobbin winder shaft.
1
1 Bobbin winder shaft
5 Swing down the spool pin so that it is
horizontal.
Place the upper thread spool for the needle on
6
the right side onto the extra spool pin, and
then secure it with the spool cap.
The thread should unroll from the top front of
the spool.
1
1 Spool cap
2 Spool
2
7 Thread the upper thread in the same way that
the upper thread for the left side was
threaded.
1
1 Thread guide cover
• For details, refer to step
"Threading the upper thread" (page 20).
8 Without passing the thread through the
needle bar thread hook, manually thread the
right needle.
Pass the thread through the eye of the needle
from the front.
• The needle threader cannot be used with the
twin needle. If the needle threader is used
with the twin needle, the sewing machine
may be damaged.
Attach zigzag foot "J".
9
• For details on changing the presser foot, refer
to "Replacing the presser foot" (page 29).
CAUTION
●
When using the twin needle, be sure to
attach zigzag foot "J", otherwise the
needle may break or the machine may be
damaged.
Turn on the sewing machine.
0
8 0
through of
Upper Threading 23