Setup Misc; Ethernet; Time Zone - Brother NC-100h Network User's Manual

Setup Misc.

Ethernet

Ethernet link mode. Auto allows the print server to operate in
100BaseTX full or half duplex, or in 10BaseT half duplex mode by
auto negotiation.
100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and
10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print
server link mode. This change is valid after the print server has been
reset (default is Auto).
If you incorrectly set this value, you may not be able to
communicate with your print server.
1 Menu/Set
Press
2
Press
10B-FD/10B-HD.
3 Menu/Set
Press
4 Stop/Exit
Press

Time Zone

This field displays the time zone you can set for your country. The
time is the difference between your location and Greenwich Mean
Time. This time will be shown on documents received via the
Internet. For example the Time Zone for Eastern Time in the USA
and Canada is GMT-05:00.
1 Menu/Set
Press
2
Enter the time.
3
Press
4 Stop/Exit
Press
4 6 1
, , , .
to select Auto/100B-FD/100B-HD/
or
.
.
4 6 2
, , , .
or to press
to exit the configuration menu.
Menu/Set
to accept the selection.
FRONT PANEL SETUP 3 - 17