Host Name - Brother NC-100h Network User's Manual

Host Name

You can register the machine name on the Network. This name is
often referred to as a NetBIOS name; it will be the name that is
registered by the WINS server on your network. Brother
recommends the name BRN_XXXXXX (where XXXXXX is the last
six digits of the Ethernet address) (up to 15 characters).
(For MFC-410CN, MFC-620CN, MFC-3340CN, MFC-5440CN,
MFC-5840CN)
1 Menu/Set
Press
2 1
Select to change. Enter the Host Name.
3 Menu/Set
Press
4 Stop/Exit
Press
(For DCP-310CN)
1 Menu
Press
2
Press or
Set
Press .
3
Press or
Set
Press .
4
Press or
Set
Press .
5
The Host Name will be displayed.
6 Stop/Exit
Press
DCP-310CN cannot change the Host Name from the control
panel menu, however the BRAdmin Professional utility
enables you to change the IP Address. (See Changing the IP
Address using the BRAdmin Professional utility, page 2-2.)
5 1 5 4
, , , . (
.
.
.
to select 3.LAN.
to select 1.Setup TCP/IP.
to select 5.Host Name.
.
1 5 for
, , MFC-5440CN)
FRONT PANEL SETUP 3 - 9