Restoring The Network Settings To Factory Default - Brother NC-100h Network User's Manual

Restoring the Network Settings to Factory Default

To restore all network settings of the internal Print/Scan server to
factory default, please follow the steps below.
(For MFC-410CN, MFC-620CN, MFC-3340CN, MFC-5440CN,
MFC-5840CN)
1
Make sure the machine is not operating, then disconnect all the
cables from the machine (except power cable).
2 Menu/Set
Press
to select Reset.
3 1
Press
to select Yes.
4 1
Press
5
The machine will re-start, re-connect cables once this is
complete.
(For DCP-310CN)
1
Make sure the machine is not operating, then disconnect all the
cables from the machine (except power cable).
2 Menu
Press
3
Press or
Set
Press .
4
Press or
Set
Press .
to select 1.Reset.
5
Press
again to select 1.Yes.
6
Press
7
The machine will re-start, re-connect cables once this is
complete.
3 - 20 FRONT PANEL SETUP
5 0 4 0 for
, , . ( ,
.
to select 3.LAN.
to select 0.Factory Reset.
MFC-5440CN)