Renfert Basic master Instruction Manual
  1. Manuals
  2. Brands
  3. Renfert Manuals
  4. Dental equipment
  5. Basic Master
  6. Instruction manual

Renfert Basic master Instruction Manual

Hide thumbs Also See for Basic master:
Table of Contents

Advertisement

Quick Links

Basic master
Nr. 2946
Ideas for dental technology
Made in Germany

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Basic master and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Renfert Basic master

Summary of Contents for Renfert Basic master

  • Page 1 Basic master Nr. 2946 Ideas for dental technology Made in Germany...

  • Page 6: Application Area

    Note the operating instructions. 2.1 Ambient Conditions (in accordance with DIN EN 61010-1) 3.2 Safety Information The Basic master may only be operated: • Indoors; • Always disconnect the unit from the • Up to an altitude of 2,000 m [6,500 ft] above sea compressed air and power sources prior to level;...

  • Page 7: Installation / Commissioning

    3.3 Liability Exclusion 4.4 Filling the Sandblasting Renfert GmbH shall be absolved from all claims Tanks for damages or warranty if: • The product is employed for any purposes Never press the foot switch during filling.

  • Page 8: Spare Parts

    Provided the unit is properly used, Renfert warrants 1. Refer to insert no. 21-9162 for installation. all parts of the Basic master for a period of 3 years. 2. Inspect for abrasive residue. In case of any claims for warranty original dealers‘...

  • Page 9: Delivery Versions

    Set of Operating Instructions, with attachment sandblasting unit Spare parts list Power cord The Basic series of Renfert sandblasting units is exclusively recommended by 3M ESPE for use with ROCATEC™. This bonding system is ideal if an 13. Delivery Versions...

  • Page 10: Troubleshooting Guide

    15. Troubleshooting Guide Problem Possible cause Corrective action No air and no • Blasting nozzle blocked at • Unscrew the nozzle from the hand-piece and blow it out. abrasive. the hand-piece. • With the nozzle removed, blow out the blasting hose by acti- vating the foot pedal.
  • Page 11 Problem Possible cause Corrective action Lamp does not • Power cord not plugged in. • Plug the power cord into the wall outlet. go on. • Fluorescent tube defective. • Replace the fluorescent tube (refer to Sec. 5.6). • Faulty electronics. •...

This manual is also suitable for:

2946

Table of Contents