Big Lots C2705-2 Assembly Instruction

Assembly Instruction

Item No.:C2705-2

SKU No.:810192209

Description: END TABLE WOOD GLASS

WARNING

Caution:Adult assembly required.Assembly will require at least 2 people.

Assemble on soft surfaces to prevent damage to the product finish.

DO NOT use power tools.

DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.

Clean with mild soap on a soft rag. Rinse and dry thoroughly.

Check bolts/screws periodically and tighten if necessary.

WARNING:Should this product become damaged, and/or components are broken or

missing, DO NOT USE.

For spare metal parts,please contact Big Lots Customer Care

Tel: 1-866-244-5687

E-Mail: talk2us@biglots.com

Page 1 of 4

Table of Contents

Do you have a question about the C2705-2 and is the answer not in the manual?

Page 1 Clean with mild soap on a soft rag. Rinse and dry thoroughly. MAINTENANCE Check bolts/screws periodically and tighten if necessary. WARNING:Should this product become damaged, and/or components are broken or missing, DO NOT USE. For spare metal parts,please contact Big Lots Customer Care Tel: 1-866-244-5687 E-Mail: talk2us@biglots.com Page 1 of 4...
Page 2 PART DESCRIPTION LOCK WASHER(Ø1/4") ALLEN WRENCH(4mm) PLASTIC COVER(Ø3/4"*1/4") The above diagram is a guide to help you to identify the different parts of the unit when removing them from the packaging.Please follow the listed steps in order to complete the assembly process. Page 2 of 4...
Page 3 STEP 1 Attach LEG (4) to the TOP FRAME (1) using BOLT(A) through SPRING WASHER (C) and FLAT WASHER (B). Tighten Bolts using ALLEN WRENCH (D) Don't full tight at this moment; STEP 2 Attach SHELF (3) to the LEG (4) using BOLT (A) through SPRING WASHER (C) and FLAT WASHER (B).
Page 4 STEP 3 Put the GLASS(2) into the TOP FRAME (1) STEP 4 The unit now is completed and please be sure to tighten all the screws. Printed In China Page 4 of 4...