Rear Panel; Hardware Setup - MSI NF725-C35 Series Manual

MS-765

ReaR PaneL

the rear panel provides the following connectors:
Lan
PS/2 mouse
Line-in
Line-out
MiC
PS/2 keyboard Serial port uSB ports uSB ports uSB ports

HaRdWaRe SetuP

this chapter provides you with the information about hardware setup procedures.
While doing the installation, be careful in holding the components and follow the
installation procedures. For some components, if you install in the wrong orienta-
tion, the components will not work properly. use a grounded wrist strap before
handling computer components. Static electricity may damage the components.
CPu & Cooler installation for aM
When you are installing the CPu, make sure the CPu has a cooler attached on the
top to prevent overheating. Meanwhile, do not forget to apply some thermal paste
on CPu before installing the heat sink/cooler fan for better heat dispersion.
Follow the steps below to install the CPu & cooler correctly. Wrong installation will
cause the damage of your CPu & mainboard.