BenQ AQColor DesignVue PD Series User Manual page 45

Item
Sets the function to be accessed by custom key 1.
Custom Key
1
Sets the function to be accessed by custom key 2.
Custom Key
2
Custom Key Sets the function to be accessed by custom key 3.
3
Allows the monitor settings to be set through the software
DDC/CI
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
When this function is activated, DP port will be in the
DP Auto
Switch input auto select loop. Otherwise, DP can only be selected
by input select or by hot key.
When this function is activated, HDMI port will be in the
HDMI Auto
Switch input auto select loop. Otherwise, HDMI can only be
selected by input select or by hot key.
Auto Power Sets the time to power off the monitor automatically in
Off power saving mode.
Resolution Sets whether to display the resolution notice of the
Notice recommended resolution when a new input source is
detected by the monitor.
Function Range
•
Picture Mode
•
Input
• DisplayPort
•
Mini
DisplayPort
•
HDMI
•
Rec. 709
•
sRGB
•
CAD / CAM
•
Animation
•
Low Blue Light
•
Darkroom
•
Brightness
•
Contrast
•
Volume
•
Mute
•
ON
•
OFF
•
ON
•
OFF
•
ON
•
OFF
•
OFF
•
10min.
•
20min.
•
30min.
•
ON
•
OFF
Navigating the main menu 45