BenQ AQColor DesignVue PD Series User Manual page 34

2. Go to
System
3. Connect the first monitor to your laptop using a DP cable.
4. Connect the second monitor to the first one using a DP cable as illustrated.
5. Follow Step 3 to connect the third and the fourth monitors if desired.
6. Power on the laptop and the monitors.
7. On your laptop, decide the way you want the content to be displayed on the connected
monitors:
Duplicate
separately) may be used to manage the display. Refer to the manual of the purchased
software for more information.
Supported resolution
To perform MST, a limited number of connected monitors is required to ensure image quality.
The following information shows the image resolution available to each monitor.
Supported
resolution
Make sure the graphic card on your laptop supports DP 1.2 for MST. Please also be noted that the supported
number of monitors for connection may vary by graphic card. To find out the capacity of your graphic card, check
its specifications or contact its manufacturer.
34 How to adjust your monitor
> , and select
USB Awake
, , or
Extend Projector only
st
1 monitor
2560 x 1440
(60Hz)
2560 x 1440
(60Hz)
2560 x 1440
(60Hz)
2560 x 1440
(60Hz)
.
ON
. Additional software (purchased
nd
2 monitor
2560 x 1440 1920 x 1080
(60Hz)
1920 x 1080 1920 x 1080
(60 Hz)
1920 x 1080 1280 x 1024
(60 Hz)
1280 x 1024 1280 x 1024
(60 Hz)
rd
3 monitor
(60 Hz)
(60 Hz)
1280 x 1024
(60 Hz)
1280 x 1024
(60 Hz)
th
4 monitor
N/A
N/A
(60 Hz)
(60 Hz)