BenQ AQColor DesignVue PD Series User Manual page 14

Tighten the thumbscrew on the bottom of the monitor
base as illustrated. And then turn the stand
counterclockwise to face forward.
Orient and align the stand arm with the monitor (
push them together until they click and lock into place
2
( ).
Gently attempt to pull them back apart to check that
they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
You might want to adjust the monitor stand height. See
Adjusting the monitor height on page 20
information.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
Your monitor is an edge to edge monitor and should be
handled with care. Adjust the screen angle by placing your
hands on the top and on the bottom of the monitor as
illustrated. Excessive force on the display is prohibited.
14 How to assemble your monitor hardware
1
),
for more
1
2
2
1