For Administrator - Brother FAX-5750e Quick Setup Manual

For Administrator

- Configure your network printer settings referring to the following instructions.
- The default password for the print server is "access". You can use BRAdmin Professional software or a web browser to change this password.
Connecting the NC-8100h to an Unshielded Twisted Pair 10Base-T or 100Base-TX Ethernet
Step 1.
Network.
To connect the NC-8100h to a 10Base-T or 100Base-TX Network, you must have an Unshielded Twisted Pair Cable. One
side of the cable must be connected to a free port on your Ethernet hub and the other side must be connected to the
10Base-T or 100Base-TX connector (an RJ45 Connector) of the NC-8100h.
Verifying Successful hardware Installation:
Plug in the AC power cord. After initialization and warm-up (this may take several seconds), the machine will come to a
Ready state.
Setting Your FAX IP Address (Using the Control Panel)
Step 2.
To set the fax IP address using the fax control panel, do the following.
1. Press the
2. Select 1 to change the IP address.
3. Enter the IP address.
4. Press Set to accept the IP address.
5. Press Stop/Exit to exit the configuration menu.
Setting Your Subnet Mask (Using the Control Panel)
Step 3.
To set the Subnet Mask using the fax control panel, do the following.
1. Press the
2. Select 1 to change the Subnet Mask.
3. Enter the Subnet Mask address.
4. Press Set to accept the Subnet Mask.
5. Press Stop/Exit to exit the configuration menu.
Setting Your Gateway Address (Using the Control Panel)
Step 4.
To set the Gateway address using the fax control panel, do the following.
1. Press the
2. Select 1 to change the Gateway address.
3.
Enter the Gateway address.
4. Press Set to accept the Gateway address.
5. Press Stop/Exit to exit the configuration menu.
You can install BRAdmin Professional, Network Printer Driver
Step 5.
Wizard, Network Print Software and Brother Internet FAX
Printing (BFP) Driver. (For Windows
BRAdmin Professional:
Network Printer Driver Wizard:
Network Print Software:
Brother Internet FAX Printing (BFP) Driver: The Brother Internet FAX Printing Driver allows you to use you networked PC to send a document file as a standard Fax
Network Owner's Manual Chapter Map
TEST SWITCH
Short push : Prints a network printer configuration page.
Long push (more than 5 seconds) : Resets the network configuration back to factory default settings.
, , , .
5 1
2
, , , .
5 1
3
, , 1 , .
5 4
This software allows system administrators to view and control the status of their networked Brother and SNMP compliant printers.
The Network Printer Driver Wizard guides you through the steps of installing a Brother network printer on a networked Windows PC.
Manually install the Internet Print software and the Peer-to-Peer Printing software.
or Internet Fax using E-mail as the transport from your PC.
®
Windows 95/98/Me IPP (Internet Printing Protocol)
Peer-to-Peer
Brother Internet Print
Netware
®
Windows NT Peer-to-Peer
Brother Internet Print (NT
®
Windows 2000/XP Peer-to-Peer NetBIOS
(Windows
IPP (Internet Printing Protocol)
UNIX/Linux
®
Macintosh
Warp Server
LAN Server
2.IP ADDRESS
3.SUBNET MASK
4.GATEWAY
®
Users Only)
TCP/IP Chapter 5
TCP/IP Chapter 6
NetBIOS Chapter 7
TCP/IP Chapter 8
IPX/SPX Chapter 9
TCP/IP Chapter 5
NetBIOS Chapter 7
DLC/LLC Chapter 11
®
only) TCP/IP Chapter 8
NetBIOS Chapter 7
®
2000 only) DLC/LLC Chapter 11
TCP/IP Chapter 5
TCP/IP Chapter 12
Apple Talk Chapter 10
TCP/IP Chapter 10
TCP/IP Chapter 5
NetBIOS Chapter 5
– 6 –
RJ45 Connector
Unshielded Twisted
Pair Cable
TCP/IP Printing
Peer to Peer Printing
NetBIOS Peer to Peer Printing
Internet Printing
Novell Netware Printing
TCP/IP Printing
NetBIOS Peer to Peer Printing
DLC Printing
Internet Printing
Peer to Peer Printing
DLC Printing
TCP/IP Printing
Unix Printing
Printing from a Macintosh
Printing from a Macintosh
TCP/IP Printing
TCP/IP Printing
Ethernet
LED Test Switch
RJ-45