Searching Labels - Brother P-touch QL-1050 Software User's Manual

Searching labels

You can search label templates registered in the P-touch Library.
1
Click .
The [Search] dialog box is displayed.
2
Check the items to be used as search conditions and set the search items.
The search items that can be set are as follows.
Settings
Multiple Parameters
File Name
Type
Location
Size
Date
3
Click [Begin Search].
The search is started and the search results are
displayed.
• The search results can be checked in the Search Results folder view.
• You can register the data in the P-touch Library by dragging and dropping to All contents folder
or its list view. To have label templates created with P-touch Editor automatically registered in
the P-touch Library, use the following method.
1. From the P-touch Editor menu, select [Tool]-[Option].
2. In the [Option] dialog box [General] tab, click [Registration Settings].
3. Select which timing to register label templates created with P-touch Editor, then click [OK].
This sets the method for combining multiple search items. If you select AND, files
are searched for that satisfy all the conditions. If you select OR, files are searched
for that satisfy any one of the conditions.
Inputs the data name to search for.
Selects the data type to search for.
Sets the folder where the data to search through is stored.
Sets the data size to search for.
Sets the date and time of on which the data to search for was last modified.
47
Details
Searching labels