Printing The Label - Brother P-touch QL-1050 Software User's Manual

Printing the Label

This section explains how to print a created label.
1
Click .
The labels are printed.
2
Cut off the printed label using the Cut
button or the Cut lever (Brother QL-500) of
the printer.
In the [Print] dialog box, if [Auto Cut] is
checked in [Options], the printed labels will
be automatically cut (Not available for QL-
500).
Print Options and label cutting
Clicking [File]-[Print] will open the [Print] dialog box.
This dialog box allows you to set the print options and
the number of copies.
You can set the number of labels between
cuts with the Option tab in the Print dialog
box displayed when you click the
Properties button (QL-1050/1050N only).
Settings
Auto Cut
(QL-550/650TD/
1050/1050N)
Cut at end
(QL-650TD/
Options
1050/1050N)
Mirror Printing
Output Directly
Printer Driver
Copies Number
All Records
Current Contact Prints the contact that is currently displayed.
Marked
Print Range
Contacts
Contact Range
When this check box is checked, labels will be automatically cut.
When this check box is not checked, labels won't be automatically cut after
printing.
Press the Cut button in the printer to cut them, as needed.
When multiple labels are printed, only cuts after the final label is printed.
When this check box is checked, labels will be flipped horizontally and
printed.
Check this check box for normal use.
Used to specify the number of copies to be printed.
Prints all contacts in shown in the Record View.
Prints the contacts marked in the Record View.
Check the check box at the left end of the field to mark the contact.
Prints the contacts designated by the range specified in the From and To
boxes.
38
Printing the Label
Details