Printing A Label - Brother P-touch QL-1050 Software User's Manual

Printing a Label

This section explains the procedure for printing a label you have created.
1
In the Print property box, set the number of copies to
be printed to [1] and click
The label is printed.
If the Print property box is not shown in the Property
dock, click to display the box.
2
Cut off the printed label using the Cut
button or the Cut lever (Brother QL-500) of
the printer.
In the [Print] dialog box, if [Auto Cut] is
checked in [Options], the printed labels will be
automatically cut. (Not available for QL-500)
Print Options and label cutting
When you click in the Print property box, the [Print]
dialog box appears.
This dialog box allows you to set the print options and
the number of copies.
You can set the number of labels between
cuts with the Option tab in the Print dialog
box displayed when you click the
Properties button. (QL-1050/1050N only)
Setting
Auto Cut
(QL-550/650TD/
1050/1050N)
Cut at end
(QL-650TD/
Options
1050/1050N)
Mirror Printing
Output directly
to Printer Driver
Copies Number
.
When this check box is checked, each label will be automatically cut.
When this check box is not checked, labels won't be automatically cut after
printing. Press the Cut button in the printer to cut.
When multiple labels are printed, only cuts after the final label is printed.
When this check box is checked, labels will be printed so they can be seen
when looking through a window.
For normal use, this check box should be checked.
Used to specify the number of copies to be printed.
10
Printing a Label
Description