Tecla RS0905H1 User Manual page 9

1
Remove the top right
hinge cover.
2
Undo the screws. Then
unscrew
remove the hinge
bracket.
3
Remove the top left
screw cover.
4
Move the core cover from
left side to right side. And
then lift the upper
door and place it on a
padded surface to prevent
it from scratching.
5
Unscrew bottom hinge.
Then remove the
adjustable feet from
another side.
Unscrew
Unscrew and remove the bottom hinge pin with flat screw drivers,
turn the bracket over and replacethe pin.
7
10
8 9
11
12
9
6
Screw
Refitthe bracket fitting the
bottom hinge pin. Replace
the adjustable foot.
8. Place the door back
on. Ensure the door is
aligned horizontally and
vertically so that the seals
are closed on all sides
before finally tightening
thetop hinge.
9. lnsertthe hinge bracket
and screw itto the top of
the unit.
10. Use a spannerto tighten
itif necessary.
Put the hinge cover and the
screw cover back.
Detach the Fridge and
the Freezer door gaskets
and then attach them
after rotating.
ENG