Tape Margin Function - Brother P-touch PT-1300 User Manual

The tape margin function allows you to adjust the size of the margins on the left and
right sides of your text. In addition, the NONE tape margin setting can be used to print
one label with many different format styles.
The default tape margin setting is FULL; however, two other settings are also available.
FULL
(1" (24 mm)
margins)
NONE
(no margins)
HALF
(1/2" (12 mm)
margins)
If an instant-lettering (rub-on) or iron-on tape cassette is installed, the text will
be printed with the FULL setting (1" (24 mm) margins), even if a different tape
margin setting is selected.
After printing a label with the tape margin function set to NONE, hold down
and press
Code
lever to cut it, otherwise some of the printed characters may be cut off as shown
below.
After printing using the HALF tape margin setting, press in the tape cutter lever
to cut off the label, and then use scissors to cut along the printed dots (:) to cen-
ter the text within the label.
42

TAPE MARGIN FUNCTION

Feed
once to feed the tape before pressing in the tape cutter
Sym.