Tape Margin Function - Brother PT 1950 - P-Touch 1950 B/W Thermal Transfer Printer User Manual

The Tape margin function allows you to adjust the size of the margins on the left and right
sides of your text.
The default tape margin setting is FULL; however, three other settings are also available.
FULL (24 mm margins)
NONE (2 mm margins)
NARROW (4 mm margins)
HALF (12 mm margins)

After printing using the NARROW and HALF tape margin settings, use scissors to cut
along the cutting guide (:) to centre the text within the label.
To change the tape margin setting:
1 Rotate + until 09/19 TAPE is displayed, and then press + to display the current
tape margin setting.
2 Rotate + until the desired tape margin setting is displayed, and then press + to
apply it to the entire text.
OR
1 While holding down c, press E once, and keep c held down to display the
current tape margin setting.
2 While still holding down c, continue pressing E until the desired tape margin
setting is displayed.
3 Release c to apply the selected tape margin setting to the entire text.

TAPE MARGIN FUNCTION

37