Tape Cassette - Brother P-touch PT-1300 User Manual

Brother pt-1300: users manual
Table of Contents

Advertisement

Available languages

Available languages

A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes
are available for this machine in a wide variety of colors and sizes, it is possible to
make distinctive color-coded and stylized labels. In addition, this machine has been
designed to allow the tape cassettes to be changed quickly and easily.
To change the TZ tape cassette:
1
Remove the back cover by pressing in on the rough area at the top end of the
machine and pulling off the cover. Pulling off the back cover lifts up the tape
release lever.
2
If a tape cassette is already installed, remove it by pulling it straight out.
3
If the ink ribbon in the other tape cassette is loose, use your finger to wind the
toothed wheel in the direction of the arrow on the cassette until there is no slack
in the ribbon.
If you are using a new tape cassette provided with a stopper, be sure to
remove the stopper before installing the cassette.
Make sure that the end of the tape feeds under the cassette tape guides.
4
Insert the tape cassette firmly into the tape compartment, making sure that the
entire back of the cassette touches the bottom of the compartment.
When inserting the tape cassette, make sure that the inner ribbon does not
catch on the corner of the metal guide.
5
Attach the back cover by inserting the tab on the bottom end of the cover into the
slot on the bottom end of the machine, then pushing down firmly on the top end
of the cover until it snaps into place.
6
Turn on the machine if it is off, and then feed the tape to remove any slack by
holding down
7
Press in the tape cutter lever to cut off any excess tape.

TAPE CASSETTE

and pressing
Code
Feed
once.
Sym.
7

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

1300

Table of Contents