Installing The Face-Up Output Tray - Brother HL-8050N Quick Setup Manual

Step 1
8
Replace the lid of the paper tray.
The lid of the tray must be firmly seated. If
not, the paper might be misaligned.
9
Put the paper tray back into the printer.
Load paper in the lower paper tray in the
same way.
14
Setting Up Your Printer
Installing the Face-up
3
Output Tray
The installation of the tray is optional
and is only necessary if you want to
do face up printing.
Be sure to switch off the power and
unplug the power cord from the
outlet before carrying out the
following steps.
1
Insert the right and left tabs of the face-up
output tray into the holes at the back of the
printer.
Face-up output tray
If you want to print to the face-up output tray,
push up lever (1) and pull out the extension
tray (2).
Extension tray