Additional Memory - Brother HL-760 Series User Manual

USER'S GUIDE

Additional Memory

CHAPTER 4 –6
This printer has 1 Mbyte of standard memory and a slot for optional
additional memory. The memory can be expanded up to 33 Mbytes by
installing a commercially available single in-line memory module (SIMM).
Additional memory is useful and may be necessary if you are using the
Page Protection function. (For details about Page Protection, see the
previous page.)
Minimum Memory Recommendation (including resident memory)
Page Protect = AUTO or Off
300 dpi
Letter/A4 1 MB
Legal 1 MB
Page Protect = Letter, A4, or Legal
300 dpi
Letter/A4 2 MB
Legal 3 MB
The following type of SIMM are recommended and can be installed:
1 Mbytes HITACHI HB56D25632B-6A, -7A
2 Mbytes HITACHI HB56D51232B-6A, -7A
4 Mbytes HITACHI HB56A132BV-7A, -7AL, -7B, -7BL
8 Mbytes HITACHI HB56A232BT-7A, -7AL, -7B, -7BL
16 Mbytes HITACHI HB56A432BR-6A, -7A
32 Mbytes HITACHI HB56A832BS-6A, -7A
This printer can accept the following types of SIMMS with the following
specifications:
Speed 60 nsec - 80 nsec
Pin Type 72 pin
Height 35.00 mm (1.38") or less
Output32 bit or 36 bit
Note
This printer can also support DIB graphics with a resolution of 1200 x 600
dpi under Windows 95/Windows 3.1 with the supplied printer driver. We
recommend to expand the printer memory to avoid any memory full error.
600 dpi
1 MB
1 MB
600 dpi
6 MB
6 MB