Brother HL-760 Series User Manual page 39

CHAPTER 4 OPTIONS
You can connect a parallel and a serial interface cable at the same time. The
auto interface selection function allows you to share the printer with two
computers. To do this, connect the parallel interface cable and then connect
the serial interface cable as follows:
1. Make sure that the power switch is turned off.
!
Caution
Be sure to turn off the power switch before connecting or disconnecting the
interface cables, or the printer may be damaged.
2. Insert and secure the serial interface connector into the serial interface
port of your printer.
3. Turn on the power switch.
CHAPTER 4 –5