Advertisement
Action 5: Plug in and Turn on Your Printer
1
2
Printing a Test Sample Page
We recommend that you print a test page. Refer to the instructions below.
1
NOTE
If the printer does not print a test sample page exactly, see "CHAPTER 6 Troubleshooting - Q
& A" of the User's Guide. If after reviewing the information in the User's Guide, your printer
still cannot print the test sample page exactly, consult your dealer.
Plug the power cord into the AC power
outlet.
NOTE
This printer has no power switch. The
printer has a sleep mode which allows the
printer to automatically reduce power
consumption when not in use.
Make sure that the READY lamp is ON
after the printer has warmed up (about 60
seconds).
Depress the TEST (FF/CONT) switch until
all lamps are turned ON. The printer starts
printing a test sample page.
The printed page shows the basic control
panel operations.
7
Advertisement
