Install The Drum Unit Assembly - Brother HL-5040 Quick Setup Manual

Step 1
2

Install the Drum Unit Assembly

Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Open the front cover by pressing the front
cover release button.
Front cover
release button
Front cover
2
Unpack the drum unit assembly.
Remove the protective part.
8
Setting Up Your Printer
Protective part
3
Rock it from side to side several times to
distribute the toner evenly inside the
assembly.
4
Put the drum unit assembly into the printer.
Drum unit
assembly
5
Close the front cover of the printer.