Install The Drum Unit And Toner Cartridge Assembly; Load Paper In The Paper Tray - Brother HL-5270DN Quick Setup Manual

2 Install the drum unit and
toner cartridge assembly
Improper Setup
DO NOT connect the interface cable yet.
1
Press the front cover release button and open
the front cover (1).
1
2
Unpack the drum unit and toner cartridge
assembly.
3
Rock it from side to side several times to
distribute the toner evenly inside the assembly.
4
Put the drum unit and toner cartridge assembly
into the printer.
5
Close the front cover of the printer.
Setting Up the Machine
3

Load paper in the paper tray

1
Pull the paper tray completely out of the printer.
2
While pressing the blue paper-guide release
lever (1), slide the paper guides to fit the paper
size. Make sure that the guides are firmly in the
slots.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark (1).
1
5
Put the paper tray firmly back in the printer.
1
9