Safety Instructions - Precautions For Use - Bodet Profil 730 Installation And Operation Manual

1.4 Safety instructions – Precautions for use
Read the safety instructions carefully before installing and configuring the clocks.
Observe the safety tips at all times during installation, use and maintenance of the product.
Key to symbols:
indicates advice, a recommendation or other practical information,
:
: indicates that special attention needs to be paid.
: indicates that misuse or failure to follow the instructions could result in an electrical hazard.
This information must be taken into account when installing or using the clock.
Installing the product
Installation and maintenance of this device must be carried out by qualified personnel.
The electrical installation of this equipment must comply with the rules laid down in the
standards in force in the country where the product is used.
Opening the product
There are no user-serviceable components in this product.
Contact BODET customer service if the product needs to be repaired.
Never open the product while it is connected to a power source.
Before working on the product, switch off the upstream power supply
(circuit breaker, etc.).
Grounding
This product is a class 2 productand therefore does not require grounding.
6
EN