Configuring Wi-Fi Clocks; Manual Configuration - Bodet Profil 730 Installation And Operation Manual

3. Configuring Wi-Fi clocks

Wi-Fi clocks can be configured manually by accessing the web server of each clock or
automatically using Bodet Detect on a laptop or Bodet Detect Mobile for an Android smartphone.
Refer to the Bodet Detect et Bodet Detect Mobile manuals for an automatic configuration.

3.1 Manual Configuration

You can access the web interface and configure a Wi-Fi clock in the following way:
- Switch the device on.
When leaving the factory, the clock behaves as an Access Point (AP), and its IP address is always
192.168.100.1.
Example: Profil 740 Wi-Fi (MAC address = 40:f5:20:5c:f6:dc)
- Display the list of wireless networks on your PC, and the clock with its MAC address appears:
Click on the access point
Once the PC is connected to the access point of the clock,
open your browser,
1/ Enter the address 192.168.100.1
The following message appears on your PC screen
2/ Click on "Advanced settings"
The following windows are for the "Google Chrome"
browser and may vary if you are using another
browser.
Click on "connect" Connected to the clock in open
mode (unsecured mode)
EN
11