What To Do If - Bodet Profil 730 Installation And Operation Manual

7. What to do if... ? Check.

What to do if... ?

There is no synchronisation
after installation.
The receiver is not at the
right time
There is no DHCP server on
the network.
Loss of Wi-Fi connection
28
1) The signal type emitted by the source clock is the same type as
the clock.
2) The NTP server is on the same network as the receiving clock
(IP addresses, subnet mask and gateways).
3) The Wi-Fi is connected.
1) The time zone selected on the web server is correct.
2) The time server is synchronised.
3) The hands are positioned correctly (shunt at start).
1) The default network configuration on the clock is as follows:
- IP: address range from 169.254.0.1 to 169.254.255.254
– MASK: 255.255.0.0
– GATEWAY: 0.0.0.0
– DNS: 0.0.0.0
1) The Wi-Fi settings have not changed (SSID, passphrase... for
this, contact the network administrator)
2) Restart the clock.
Check that...
EN