Pkm GS 83.4 A++T Instruction Manual page 102

1. Disconnect the appliance from the power supply
(unplug).
2. Slightly tilt the appliance back and secure it in this
position. Do not tilt the appliance more than 45
3. Remove the 2 cover caps on the worktop carefully with a
small pointed object and unscrew the 2 worktop-screws
(fig. 1). Then unscrew the screws on the back. Remove
the worktop and the top hinge bracket (fig. 2).
4. Open the door a bit and remove it from the bottom
hinge.
5. Tilt the appliance slightly backwards. A second person
should hold the appliance now so you have access to the
bottom hinge.
6. Remove the 2 screws of the bottom hinge. Remove the
adjustable foot on the left and fix it on the opposite side
(fig. 3).
7. Fix the bottom hinge on the opposite side.
8. Remove the sealing plug from the top left opening of the
door und press it firmly into the top right one.
9. Place the worktop upside down. Remove the hinge
bracket (with axis, fig. 2) and fix it on the opposite side.
Do not tighten the screws too firmly.
10. Reinstall the door. Check, that the hinge axis meets its
proper position in the bottom left opening of the door.
11. Place the worktop on the appliance with the door closed.
Check, that the top axis meets the top opening (where
the seal plug was). Fasten the 2 top screws first and then
the screws on the back slightly. Adjust the worktop
properly. Check, that the door is adjusted perpendicularly.
102
0
!