Network I/F (For Dcp-J715W, Mfc-J615W And Mfc-J630W); Wlan Enable (For Dcp-J315W, Dcp-J515W, Mfc-J265W And Mfc-J415W) - Brother MFC-J615W User Manual
Multi-protocol on-board ethernet multi-functional print server and wireless (ieee 802.11b/f) ethernet multi-function print server
Hide thumbs
Also See for MFC-J615W:
- Manual del usuario (131 pages) ,
- Basic user's manual (131 pages) ,
- User manual (129 pages)
Table of Contents
Advertisement
Control panel setup
Network I/F (For DCP-J715W, MFC-J615W and MFC-J630W)
You can choose the network connection type, wired network connection or wireless network connection. If
you want to use the wired network connection, choose Wired LAN, and if you want to use the wireless
network connection, choose WLAN. You can only have one network connection type active at a time.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Network I/F.
Press OK.
d
Press a or b to choose Wired LAN or WLAN.
Press OK.
e
Press Stop/Exit.
WLAN Enable (For DCP-J315W, DCP-J515W, MFC-J265W and MFC-J415W)
If you want to use the wireless network connection, set WLAN Enable to On.The default setting is Off.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN Enable.
Press OK.
d
Press a or b to choose On or Off.
Press OK.
e
Press Stop/Exit.
5
5
5
76
Hide quick links:
Advertisement
Table of Contents
