Control panel setup
e
Press a or b to choose Node Name.
Press OK.
f
Enter the Node Name.
(For MFC models) Press OK.
(For DCP models) Press a, b, d or c to select
Note
For DCP models, for information how to enter text, see Entering Text on page 112.
g
Press Stop/Exit.
WINS Config
This selection controls how the machine obtains the IP address of the WINS server.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
For DCP-J715W, MFC-J615W and MFC-J630W
(For Wired) Press a or b to choose Wired LAN, and press OK.
(For Wireless) Press a or b to choose WLAN, and press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose WINS Config.
Press OK.
f
(For DCP-J315W, MFC-J265W and MFC-J415W)
Press a or b to choose Auto or Static.
Press OK.
(For DCP-J515W, DCP-J715W, MFC-J615W and MFC-J630W)
Press d or c to choose Auto or Static.
Press OK.
g
Press Stop/Exit.
Auto
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto or DHCP for this feature to work.
Static
Uses a specified IP address for the primary and secondary WINS servers.
, and press OK.
OK
OK
5
5
5
5
69