Control panel setup
c
For DCP-J715W, MFC-J615W and MFC-J630W
(For Wired) Press a or b to choose Wired LAN, and press OK.
(For Wireless) Press a or b to choose WLAN, and press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose APIPA.
Press OK.
f
(For DCP-J315W, MFC-J265W and MFC-J415W)
Press a or b to choose On or Off.
Press OK.
(For DCP-J515W, DCP-J715W, MFC-J615W and MFC-J630W)
Press d or c to choose On or Off.
Press OK.
g
Press Stop/Exit.
Setup Wizard
The Setup Wizard guides you through the wireless network configuration. For more information, see Using
the Setup Wizard from the control panel on page 27.
WPS/AOSS™
If your wireless access point supports either Wi-Fi Protected Setup (PBC
the machine easily without knowing your wireless network settings. Your Brother machine has the
WPS/AOSS™ menu on the control panel. This feature automatically detects which mode your access point
uses, Wi-Fi Protected Setup or AOSS™. By pushing a button on the wireless access point/router and the
machine, you can setup the wireless network and security settings. See the User's Guide for your wireless
access point/router for instructions on how to access one-push mode. (See Using WPS or AOSS™ from the
control panel menu to configure your machine for a wireless network on page 32.)
1
Push Button Configuration
WPS w/PIN code
If your wireless access point supports Wi-Fi Protected Setup (PIN Method), you can configure the machine
easily without a computer. The PIN (Personal Identification Number) Method is one of the connection
methods developed by the Wi-Fi Alliance
to the Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the User's Guide for your wireless access point/router for instructions on how to access the
Wi-Fi Protected Setup mode. (See Using the PIN Method of Wi-Fi Protected Setup on page 34.)
®
. By inputting a PIN which is created by an Enrollee (your machine)
1
) or AOSS™, you can configure
5
5
5
5
72