General Safety Information - Agilent Technologies N8480 Series Operating And Service Manual

General Safety Information

WA R N I N G
C A U T I O N
N8480 Series Power Sensors Operating and Service Guide
The following general safety precautions must be observed during all
phases of operation, service, and repair of this instrument. Failure to
comply with these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture, and intended
use of the instrument. Agilent Technologies assumes no liability for the
customer's failure to comply with these requirements.
Before connecting the power sensor to other instruments ensure that all
instruments are connected to the protective (earth) ground. Any
interruption of the protective earth grounding will cause a potential
shock hazard that could result in personal injury.
• Use the instrument with the cables provided.
• Repair or service that is not covered in this manual should only be
performed by qualified personnels.
v