Calibration - Brother MFC-9420CN Software User's Manual

Printing

Calibration

The output density for each colour may vary depending on the temperature and humidity of the environment
the machine is in. Calibration helps you to improve the colour density.
1
Press Menu/Set, 4, 4.
2
Press ▲ or ▼ to select Calibrate .
3
Press Menu/Set.
4
Press 1 to select Yes .
5
Press Stop/Exit.
You can reset the calibration parameters back to those set at the factory.
1
Press Menu/Set, 4, 4.
2
Press or to select Reset .
▲ ▼
3
Press Menu/Set.
4
Press 1 to select Yes .
5
Press Stop/Exit.
Note
If an error message is displayed, press Stop/Exit and try again. For more information, see Troubleshooting
and routine maintenance in the User's Guide.
1
1 - 6