Polled Transmit; Setup For Polled Transmit (Standard) (Monochrome Only) - Brother MFC-9420CN User Manual

Chapter 10
6
Press Mono Start or Colour Start.
The machine polls each number or
group in turn for a document.
Note
To cancel all sequential polling receive jobs,
press Menu/Set, 2, 6. (See Checking job
status and cancelling a waiting job on page
5-8.)
To stop Sequential Polling in progress
1
Press Menu/Set, 2, 6.
The LCD will display the name, if you
stored it, or the fax number being
dialled.
2
Press Menu/Set.
The LCD will display:
XXXXXXXX
1.Clear 2.Exit
3
Press 1 to Clear.
The LCD will then display the sequential
polling job number and 1.Clear
2.Exit .
4
To cancel the sequential polling, press
1.
5
Press Stop/Exit.
10 - 3

Polled Transmit

Polled Transmit is when you set up your
machine to wait with a document so another
fax machine can call and retrieve it.
Setup for Polled Transmit
(Standard) (Monochrome
only)
1
If it is not illuminated in blue, press
(Fax).
2
Load your document.
3
Press Menu/Set, 2, 2, 6.
Setup Send
6.Polled TX
4
Press ▲ or ▼ to select Standard .
Press Menu/Set.
Next
1.Yes 2.No
5
Press 2 and press Mono Start.
Note
■
The document will be stored and can be
retrieved from any other fax machine until
you delete the fax from memory by using
the Cancelling a Job menu setting. (See
Checking job status and cancelling a
waiting job on page 5-8.)
■
Once a document has been stored in the
memory for polling transmit, it can be sent
and received more than once.