Fluidics System - Sony LE-SP6800 Series Safety Manual

Fluidics system

Configuration
Model
Sample loader type
Supported sample tube
Flow rate
Optical detection channel
size
Performance
Configuration
Model
Fluorescence sensitivity
Fluorescence detection
linearity
Detectable cell size
Fluorescence detection
resolution
1) Excluding the LE-SP6800ZC.
Design and specifications are subject to change without notice.
Note
Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT
OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER
REASON WHATSOEVER.
2-laser type (488/638)
LE-SP6800ZB
5.0 ml polystyrene round tubes
Low (3 m/s), Mid (5 m/s), High (10 m/s)
2-laser type (488/638)
LE-SP6800ZB
FITC: 120 MESF, PE: 70 MESF
FITC R
488 nm laser: CH16, 638 nm laser: CH27
2-laser type (405/488)
LE-SP6800ZC
Single auto-loader
200 µm × 200 µm
2-laser type (405/488)
LE-SP6800ZC
2 2
> 0.995, PE R > 0.995
0.5 µm to 40 µm (beads)
1)
< 2.5% (HPCV)
3-laser type (405/488/638)
LE-SP6800ZE
3-laser type (405/488/638)
LE-SP6800ZE
Specifications
11