Kallista P30803-00 Installation Manual page 5

Install the Anchors
Nail
2. Install the Anchors
Press and hold the legs of a wall anchor together, then insert the
wall anchor legs into the two anchor hole locations.
Carefully tap each wall anchor into the finished surface until
flush.
NOTE: If the wall anchor was inserted into a space between the
studs, it will be necessary to spread the wall anchor legs. Insert a
thin, long object (such as a finishing nail) into the wall anchor hole
to spread the anchor legs.
3. Install the Wall Plate
Insert the bolt through the accessory hole in the wall plate, as
illustrated.
With the head of the bolt flush against the finished wall, align
holes in the wall plate with the anchor holes.
Secure the wall plate to the wall by threading two screws through
the anchor holes.
Kallista
Install the Wall Plate
Anchors
Bolt
Accessory Hole
Anchor
Holes
5
Screw
Screw
1008433-2-A