Safety Notices; Electrical Safety Information; Limited Warranty - Ubiquiti AMO-2G10 Quick Start Manual

AMO-2G10 Quick Start Guide
Max. VSWR
Wind Survivability
Wind Loading
Polarization
Cross-Pol Isolation
RF Connectors
Mounting
ETSI Specification

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING:
WARNING:

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer's label. Connection to a different
power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.

Limited Warranty

ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials
or class actions.
Compliance
RF Exposure Warning
The antenna and transmitter must be installed to provide a separation distance from all persons and must not be located or operating in conjunction with
any other antenna or transmitter. For the specific separation distance, refer to the Quick Start Guide for your Rocket device (transmitter).
L'antenne et l'émetteur doit être installé pour fournir une distance de séparation de toute les personnes et ne doit pas être situé ou opérant en conjonction
https://dl.ubnt.com/qsg/AMO-2G10/AMO-2G10_EN.html[11/10/2020 9:28:27 AM]
Do not use this product in location that can be submerged by water.
Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Universal Pole Mount, RocketM Bracket, and Weatherproof RF Jumpers Included
1.7:1
200 km/h (125 mph)
97.9 N @ 200 km/h
(22 lbf @ 125 mph)
Dual Linear
25 dB Min.
2 RP-SMA Connectors (Weatherproof)
EN 302 326 DN2