Ubiquiti AMO-5G10 Quick Start Manual

Hide thumbs Also See for AMO-5G10:

Download this manual

Package content

Antenna

Serrated Flange Nuts (Qty:

installation requirements

Rocket®M5 or RocketM5 GPS (sold separately)

13mm wrench

Category 5 (or higher) shielded cabling must be used for all Ethernet connections

and must be connected to the AC ground of the PoE.

We recommend that you protect your networks from harmful outdoor

environments and electrostatic discharge phenomena with Ubiquiti's

Industrial Grade Shielded Ethernet Cable. For more information, visit

toughcable

Device installation

AMO-5G10 Quick Start Guide

Foot Clamps (Qty: 2) Pan Head Screws (Qty: 4)

Cables RF (cant.: 2)

ui.com/

Page 1 Category 5 (or higher) shielded cabling must be used for all Ethernet connections and must be connected to the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and electrostatic discharge phenomena with Ubiquiti's Industrial Grade Shielded Ethernet Cable. For more information, visit ui.com/...
Page 2 AMO-5G10 Quick Start Guide...
Page 3 AMO-5G10 Quick Start Guide...
Page 4 AMO-5G10 Quick Start Guide...
Page 5 AMO-5G10 Quick Start Guide...
Page 6 AMO-5G10 Quick Start Guide specs AMO-5G10 Dimensions 582 x 90 x 65 mm (22,91 x 3,54 x 2,56") Weight with mounting 0,68 kg (1,50 lb) Frequency 5,45 - 5,85 GHz...
Page 7: Safety Instructions
AMO-5G10 AMO-5G10 Quick Start Guide Gain 10 dBi 12° lift amplitude 4° electric tilt down VSWR max. 1,6:1 Wind resistance 200 km/h (125 mph) 71,17 N a 200 km/h wind load (16 lbf a 125 mph) Polarization Lineal doble 25 dB min...
Page 8 For the specific separation distance, see the quick start guide for your Rocket device (transmitter). WEEE Compliance Statement Declaration of conformity online resources © 2022 Ubiquiti Inc. All rights reserved.