Be Cool BCRS2102F Instruction Manual page 24

Change battery:
1. Pull out the battery holder on the back of the remote control and remove the old
battery from the holder:
2. Now insert a new CR2025 battery, always paying attention to the
polarity markings (+/-) on the battery and the battery holder.
3. Then push the battery holder fully back into the remote control.
CORRECT USE OF THE REMOTE CONTROL
Point the remote control directly at the front of the unit, making sure that there are no obstacles
between the remote control and the unit.
Do not expose the remote control to direct sunlight and keep it away from heat
SAFETY INSTRUCTIONS FOR BATTERY REPLACEMENT:

When the remote control is replaced or disposed of, the batteries must be removed and
disposed of in accordance with current legislation as they are harmful to the
environment.

Do not dispose of batteries in fire.

Batteries can explode or leak.

If the remote control will not be used for a long time, remove the battery.
NOTE
Please handle the remote control with care.
sources.
Seite 24 von 33