First Installation; Satellite Mode - Tele System SOUND LED10 Manual

ENGLISH
Main menu description
Press the MENU key to bring up the main menu and use the arrow keys ▲ / ▼ and
t / u to navigate through the titles of menu. Press the MENU button to return to the
previous menu or EXIT to exit. The menus are: Channels, Images, Sound, Time,
Security, Settings .

First Installation

At the first installation, select the OSD language and the country, enter the PIN (4
digits) and confirm it to proceed. Select the signa type (DVB-T2 or Satellite) to launch
the channel scanning and press OK.
Automatic channel search
Press MENU à Channel à Auto Tuning and confirm with OK button. Select the
country (default ITALY) and press OK to launch the scanning.
At any time, pressing EXIT or Menu, the scanning can be stopped.
WARNING! Automatic channel searching deletes all channel lists previously saved.
DVB-C mode (via cable) is available to receive the digital channels, select DVB-C and
press OK to launch the scanning.
WARNING! Make sure to not select this mode in case of traditional terrestrial
antenna system.
WARNING! The reception and therefore the viewing of digital terrestrial channels
depends on the level and the quality of the antenna signal available The signal varies
according to the area in which you live, to the correct orientation/functioning of the
antenna system and to the quality of the signal transmitted by the digital terrestrial
repeaters
Channel list editing.
Press MENU à Channel à Edit Program and confirm pressing OK. Once displayed
the list, the options are:
RED ( Delete ): select one or more channels, delete them pressing RED button.
Blue ( Skip ): select the channel and press BLUE button, once activated the channel
can be selected with the numeric keys of remote control unit.
Yellow (Move): to move a channel, select the channel you want to move, press the
Yellow button, use arrow keys to move the channel to the desired position or enter
the desired position number, then press OK to confirm.

Satellite mode

If you choose satellite, you can choose to load a default satellite channels list by
pressing OK and confirming Yes (left arrow) to the confirmation request; or proceed
with normal installations, once the satellite parameters are set, scan type, channel
type and type of service, by pressing OK and choosing No (right arrow) on the next
screen.