External Device Connection - Tele System SOUND LED10 Manual

TELE System
TV description
On the rear side of TV, the available I/O connections are:
12. Slot Common Interface (CI / CI+ plus)
13. USB port (Mediaplayer function)
14. HDMI input
15. Coaxial digital audio output (COAXIAL)
16. SATELLITE RF Antenna (Tipo F)
17. TERRESTRIAL RF Antenna (IEC)
18. PC Audio IN
19. RCA Video + Audio (AV)
20. VGA (PC)
21. Earphone output (jack 3,5 mm)
22. Power supply 220V AC
Connections
Antenna Connection
In order to watch live TV programs, connect the TV to an terrestrial and/or satellite
antenna. In both cases, connect the antenna cable (75 Ω) to RF inputs on the rear of
TV set.

External device connection

Via RCA: be sure that both TV and external device are off. Use RCA/SCART adaptor
to connect the external device via SCART to the AV input of TV set. Turn on the devices,
press SOURCE à AV.
Via HDMI: be sure that both TV and external device are off. Connect the cable from
source to TV set and turn on the devices; Turn on the devices, press SOURCE à HDMI.
Batteries insertion
You have to replace or install the batteries when:
You buy the product.
•
• the remote control does not work properly.
Once you open the battery door located on the back of the remote, insert the 2
batteries (AAA) in the compartment, making sure to respect the correct polarity as
indicated.
Remove the used batteries, which must be disposed of separately from household
waste taking them to any store or collection point and then repeat the operations for
insertion.
To avoid damaging the remote control with the leakage of corrosive liquid, you should
remove the batteries if you plan not to use the device for a long period of time. Avoid
using different types of batteries or dead and new batteries at the same time.