Changing Copy Quality; Enlarging Or Reducing The Image Copied - Brother MFC-295CN User Manual

Chapter 10

Changing copy quality

You can choose from a range of quality
settings. The default setting is Normal.
To temporarily change the quality setting,
follow the instructions below:
Press Normal Normal is the
and then a or b
to choose
Quality
Fast
Best
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options and a or b to
choose Quality.
Press OK.
e
Press a or b to choose Normal, Best or
Fast. Press OK.
f
Press Black Start or Color Start.
60
10
recommended
mode for ordinary
printouts. This
produces good copy
quality with good
copy speed.
Fast copy speed
and lowest ink
consumption. Use to
save time printing
documents to be
proof-read, large
documents or many
copies.
Use best mode to
copy precise images
such as photographs.
This provides the
highest resolution
and the slowest
speed.
.
To change the default setting, follow the
instructions below:
a
Press Menu, 3, 1.
1.Quality
b
Press a or b to choose Normal, Best or
Fast. Press OK.
c
Press Stop/Exit.
Enlarging or reducing the
image copied
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
Press
Fit to Page
Custom(25-400%)
198% 4"x6"iA4
186% 4"x6"iLTR
and then a or b
104% EXEiLTR
to choose
100%
Enlarge/Reduce
97% LTRiA4
93% A4iLTR
(MFC-255CW)
83%
(MFC-295CN)
83% LGLiA4
(MFC-255CW)
78%
(MFC-295CN)
78% LGLiLTR
46% LTRi4"x6"
10