Printing Received Faxes - Brother MFC-295CN User Manual

Printing (continued)
Difficulty
The machine prints dense lines on
the page.
The printouts are wrinkled.
Cannot perform 'Page Layout'
printing.
Print speed is too slow.
Photo paper does not feed
properly.
Machine feeds multiple pages.
There is a paper jam.
Printed pages are not stacked
neatly.
Machine does not print from
® ®
Adobe Illustrator .

Printing Received Faxes

Difficulty
Condensed print and white streaks
across the page or the top and
bottom of sentences are cut off.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
Received color fax prints only in
black & white.
Left and Right margins are cut off or
a single page is printed on two
pages.
98
Suggestions
Check Reverse Order in the Basic tab of the printer driver.
In the printer driver Advanced tab, click Color Settings, and uncheck
Bi-Directional Printing for Windows
Make sure you are using Genuine Brother Innobella™ Ink.
Check that the paper size setting in the application and in the printer driver are the
same.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver Basic tab. Also, click Color Settings, and make sure you uncheck Color
®
Enhance (True2Life ).
Turn the borderless feature off. Borderless printing is slower than normal printing.
®
(See Printing for Windows
User's Guide on the CD-ROM.)
When you print on Brother Photo paper, load one extra sheet of the same photo
paper in the paper tray. An extra sheet has been included in the paper package
for this purpose.
Clean the paper pick-up rollers. (See Cleaning the paper pick-up rollers
on page 120.)
Make sure the paper is loaded properly in the paper tray. (See Loading paper and
other print media on page 8.)
Check that more than two types of paper are not loaded in the paper tray at any
one time.
Make sure the paper length guide is set to the paper size. Do not extend the paper
tray when you load A5 or smaller size paper. (See Printer jam or paper jam
on page 113.)
Make sure you are using the paper support flap. (See Loading paper and other
print media on page 8.)
Try to reduce the print resolution. (See Printing for Windows
Faxing for Macintosh in the Software User's Guide on the CD-ROM.)
Suggestions
You probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
problem is with the sending machine. Try receiving from another fax machine.
Replace the color ink cartridges that have reached the end of their life, and then
ask the other person to send the color fax again. (See Replacing the ink cartridges
on page 116.)
Turn on Auto Reduction. (See Printing a reduced incoming fax on page 39.)
®
or Bi-Directional Printing for Macintosh.
or Printing and Faxing for Macintosh in the Software
®
or Printing and