Table of Contents
Advertisement
1.2.2 Limitations of use
•
The device may only be used in accordance with the information in these operating
details or for the parameters agreed in the supply contract (see appliance rating plate)
and the application.
•
Approval for this device loses its validity if modifications not agreed with us have been
made.
•
If this device is inserted incorrectly, the function/protection expected from this device may
be impaired.
1.2.3 Avoidance of risks and damage
•
The commissioning and operating instructions must be made available to the responsible
authorities.
•
The current commissioning and operating instructions and the valid additional information
are available via the manufacturer portal.
•
If the device is given to a third party, the commissioning and operating instructions in the
national language of the third party must also be handed over without fail.
•
The BTU may only be commissioned and operated by trained personnel with special
authority and expertise.
•
Read and observe the commissioning and operating instructions carefully and keep them
in a safe place.
•
Take note of and follow the commissioning and operating instructions printed in bold and
highlighted in the individual sections!
•
During transport, avoid knocks and carelessly setting down the device etc. as this can
lead to damage.
•
For intermediate storage, ensure that the storage location is suitable for the device.
•
The storage location must be dry, and the device must be secured against damage.
•
This device must not be used in potentially explosive atmospheres.
1.3 Exclusion of liability
IGEMA GmbH Mess- und Regelsysteme will assume no liability if the above regulations,
instructions and safety precautions are not observed and followed. If they are not expressly
listed in the installation and operating instructions, changes to an IGEMA device are carried
out at the risk of the user.
2.
General information
Routine service must be carried out regularly:
•
Pressure sensor maintenance including characteristic curve adjustment
•
Pressure switch test/maintenance including switching point
•
Checking all the functional areas of the safety shutdown
7
Advertisement
Table of Contents
