Table of Contents
Advertisement
8.2 Alert: "Beware: Pressure switch triggered"
If a pressure of
> 0.3/0.5/0.8 bar (30.50.80 kPa)
is applied to the control line, the locking
function is interrupted in the "Attention" and "Run" status. This means that during operation
the active control is deactivated and the brake pressure from the towing vehicle is available
in the control line.
8.3 Alert: "Error: Timeout on receiving ECU"
Problem with the connection between the ECU and control unit. Please check wiring (c).
17
Advertisement
Table of Contents
