Table of Contents
Advertisement
6.5 Static TEST (stat. TEST)
The static TEST "stat. TEST" is designed for use with roller test bench. The difference between
mode "brake TEST" and this one is, that the target pressure can be changed in run mode. The
two arrow keys "
" (10) and "
" (9) are used for this purpose. Briefly pressing on the button
changes the value by 10 kPa and if held for longer it will change by 20 kPa. By entering stop
state, the device will automatically reset the target pressure to 0 kPa. All other features are
identically with mode 6.4 Brake Test.
14
Advertisement
Table of Contents
