Table of Contents
Advertisement
6.
Operation
6.1 Key configuration
The interactive display shows the function of each key.
The display and keys are configured as follows:
6.2 Start-up
After commissioning, the manufacturer's logo appears on the display (1) for approx. 3 seconds.
Afterwards the customer's logo with the following information is displayed:
-
Last service
-
Serial number
This information can also be displayed later under the menu item "Info".
Press the "OK" button (2) to enter the main menu.
6.3 Main menu
The main menu has the following sub-items:
-
Brake TEST
-
Zero calibration
-
Settings
-
Info
The "
" (10) and "
confirmed by pressing the "Enter" key. To leave a sub-item, use the "Exit" key (3).
12
" (9) keys are used to select the desired sub-item and they are
Advertisement
Table of Contents
