TechniSat TECHNIPOLAR 2 M Instruction Manual page 46

> Point the remote control at the top of the air conditioner. Observe the
maximum distance of 7 metres.
8.3 Activating special functions with the remote control
8.3.1 Ventilation outlet
The upper ventilation outlet opens and closes slightly in a constant rhythm. If you
want to lock the air outlet in one position, press the Air Outlet button on the remote
control.
Press the button again to automatically adjust the panning.
8.3.2 Changing the temperature units
Press the Change temperature units button to switch the temperature units shown
on the display between degrees Celsius and Fahrenheit.
8.3.3 Night mode
In night mode, the display and the LED on the top of the unit are dimmed. The air
conditioner rotates at the slowest speed.
> Select cool or automatic mode.
> Press the SLEEP button on the remote control or on the device.
The displays are now dimmed and the fan runs at the slowest speed.
In cool mode, the temperature setting is gradually increased to 1 °C above
the original target temperature for each of the first 2 hours. The unit then
maintains the same temperature for 6 hours and then switches to standby
mode.
In heat mode, the temperature setting is gradually lowered to 1 °C below
the original target temperature for each of the first 3 hours. The unit then
maintains the same temperature for 5 hours and then switches to standby
mode.
46