TechniSat TECHNIPOLAR 2 M Instruction Manual page 42

6.4 Dehumidifier mode
The unit is ideal for reducing the room humidity (in spring and autumn, damp
rooms, rainy periods, etc.).
Note that in dehumidification mode the air is continuously dehumidified
and a large amount of condensed water is produced. The condensed water
must be discharged to the outside via the upper drain (11). Direct the water
into a suitable container and empty it regularly, depending on the size of the
container.
> Remove the upper drain cap (Fig. 1).
> Connect the supplied hose or a suitable hose to the connection (Fig. 2) and
direct it into a suitable container.
1.
> Press the MODE button (6) repeatedly until Dry (A) lights up and, at the
same time, the symbol for the automatic fan control Auto (B) lights up.
In this mode, the fan speed is selected automatically by the unit and cannot
be set manually.
Be careful not to kink the condensate hose.
42
2.
Cap
Connect the
hose